Review: Turbo 3 Low Profile Roof Vent
- Jun 13
- 2 min read

The "Turbo 3 Low Profile Roof Vent" is a wind-driven, budget-friendly roof vent available at prices ranging from £25 to £35. With a height of just under 6 cm, it's an excellent option for potential buyers looking to increase airflow in their van while still fitting under car park barriers.
In this review, I will walk through the installation process and share my experience with the vent, before discussing the positives, negatives, and important considerations to keep in mind before making your purchase.
A full video walkthrough of the vents installation can be found at the bottom of the page.
What's Included?
In the box, you will find:
Black/white roof vent
Three screws to account for different roof thicknesses
Fastening bracket
Open/close bracket
Instruction manual
Tools Needed

To install the vent, you will need:
Drill
80mm hole saw
File
Screwdriver
Measuring tape and pen
Footstep/ladder to reach the roof
Recommended:
Anti-rust paint
Sikaflex sealant
Ease of Install

The easy install of the Turbo 3 roof vent is its main selling point. You only have to drill a single 80mm hole and then fasten it with the correct size screw for your roof thickness.
The instruction manual is clear and easy to understand.
Quick step guide:
Measure position for vent
Cut the hole
Prep the surface
Screw into position

Although the manual didn't specify the need for sealant, I applied some during my installation to help to prevent leaks.
For a full step-by-step guide: Click here
Positives
Quick and easy install
No wiring needed
Very quiet - don't hear it at all when driving
Any Complaints?
The only complaint I have is that there was a small misshaped piece of plastic in the screw socket, which had to be removed with a Stanley blade. Other than that, the installation was a smooth experience.
I also want to note that the online promotional images across multiple websites show the vent as being opened and closed with a push-and-pull lever in some photos. In reality, it operates with a simple twist socket. While this method works fine, it isn't as secure or solid as the full push-pull seal found on other models.
Another small note is that the vent spins while driving but requires very strong wind to spin when stationary.
Conclusion
Overall, I'm very happy with both the install and performance of the Turbo 3 Roof Vent. The simple install and quiet function is exactly what I required.
Be sure to check the height of your van before ordering the vent, and add 6cm (the vent is 59.5mm) if you are concerned about height restrictions.
Comments